DescriptionHome » Shop » Gazettes & Electronics » Tablets & Computers » Miscellaneous » ARCTIC Liquid Freezer II 280 A-RGB – processor liquid cooling system
ARCTIC Liquid Freezer II 280 A-RGB – processor liquid cooling system
Product Type : Processor liquid cooling system
Heatsink & Fan
Fans Qty : 2
Fan Diameter : 140 mm
Fan Height : 27 mm
Rotation Speed : 200-1900 rpm
Air Flow : 68.9 cfm
Compatible With : LGA2066 (Square ILM) Socket, LGA1200 Socket, LGA1156 Socket, LGA1152 Socket, LGA1700 Socket, LGA1155 Socket, LGA1150 Socket, LGA1151 Socket, LGA2011-3 (Square ILM) Socket, Socket AM4
Power Connector : 3-pin ARGB connector, 4-pin fan connector
Features : RGB Fusion 2.0, ASUS Aura Sync, MSI Mystic Light Sync, ASRock Polychrome RGB, Pulse-width modulation (PWM) support, Addressable RGB
Fan Bearing : Fluid dynamic bearing
Air Pressure : 2 mm
Noise Level : 0.3 Sone
Dimensions & Weight
Weight : 1,6 kg
Dimensions & Weight (Shipping)
Shipping Width : 15,5 cm
Shipping Depth : 33,5 cm
Shipping Height : 17 cm
Shipping Weight : 2,117 kg
Service & Support
Type : 6-year warranty
Color : Black
Color Category : Black
• Light up your build
The Liquid Freezer II A-RGB combines the efficient, award-winning PWM pump of the Liquid Freezer II with A-RGB fans optimized for static pressure. This gives you a whole new aesthetic with extremely low noise and equally low temperatures.
• Efficient, in-house developed pump
Like the other components, the pump is also PWM controlled. This leads to a significantly lower noise level at low and typical loads, but also to much lower power consumption, with a maximum of 0.8 W at no load, 2.3 W under normal load and a maximum of 6.78 W under full load for the entire AiO, without illumination.
• Premium class radiator
Unlike most other all-in-one liquid cooling manufacturers, ARCTIC relies on 38 mm thick radiators with a high fin density. This means that a larger amount of water can be used in the circuit, and the cooling surface can be significantly increased. Water has a much higher heat capacity than aluminum or copper. This leads to a slower and up to 5 ° C lower temperature increase in the temporary turbo mode of modern CPUs.
• Smooth VRM fan
The fan is PWM-controlled and can cool your voltage transformers and the base area almost inaudibly by up to 15° C. This is especially effective in overclocking scenarios, inadequate VRM cooling or in housings with poor airflow, thus permitting continuously high loads. If sufficient VRM cooling is available, it can be switched off at will.
• High quality hoses with integrated cable management
The fiber-reinforced, long EPDM tubing of the Liquid Freezer II allows installation even in large cases and effectively prevents the coolant from evaporating, so you don’t have to worry about refilling the compact water cooling system. In addition, it hides both the A-RGB and PWM cables of your radiator fans thanks to a well thought-out cable management system. This way, you only have to connect two plugs to the mainboard and save valuable time during installation. In the end, you don’t need to hide any more cables and your view is reduced to the essentials.