Description
Home » Shop »Bondtech LGX® Lite Arrow for Creality
Main Features
- It converts the compatible printers from Bowden to direct extruder.
- Extra load on strain gauge is limited to the LGX Lite itself.
- Housing is light and insulated from the Extruder to allow for strain gauge levelling.
- It is compatible with all stock hotends and cooling fans.
- Housing is easy to remove for maintenance and service of the hotend and extruder.
- Z-position of the fan shroud may be adjusted.
Additional Features
Weight: 65g.
E-steps : 562 @ 16 microsteps.
Klipper’s rotation_distance : 5.7.
Stepper motor current : 0.45 to 0.65A max.
Max operating temperature : 90°C.
It may be upgraded with Slice Engineering hotends:
- Copperhead Screw Mount;
- Mosquito;
- Mosquito Magnum;
- Mosquito Magnum + Air.
Product includes:
- 1x LGX Lite extruder mounting set
- 1x PA12 extruder mount
- 1x PA12 hotend mount
- 4x M3x6 button head screw
- 2x M3x10 button head screw
- 2x M3x8 button head screw
- 1x M3x30 screw
- 1x M3 square nut
- 1x Capricorn cutting fixture
- 1x 70mm Capricorn tube
- 1x LGX Lite Arrow housing set
- 1x PA12 front housing
- 1x PA12 left wing
- 1x PA12 right wing
- 1x PA12 top lid
- 1x PA12 fan shroud
- 1x PA12 (breakout board/cables) cover
- 2x M3x8 button head screw
- 1x M3x16 screw
- 2x M3x20 MC6S screw
- 3x M3 square nut
- 1x Powered by Bondtech sticker
Upgrade kit compatible with LGX Lite only to use on:
Creality CR-6 SE
CR-6 Max
CR-10 Smart
The LGX Lite Arrow for Creality plastic parts are made of grey Polyamide (PA12) with no dyeing featuring a wax protective coating.
Extruder not included. A LGX Lite extruder is required to use this kit.- EXT-KIT-90
– 300
– Hersteller: Bondtech
Reviews
There are no reviews yet.