Raise3D Rigid 3K Grey V1 Resin 1kg

Description

Raise3D Rigid 3K Grey V1 Resin 1kg

Standard UV Resin

This resin is both rigid and tough. While highly rigid materials may cause models to break during removal, overly flexible resins can deform or lose detail, affecting print accuracy and appearance. Anycubic’s resin maintains a balanced composition that performs reliably under various climate conditions and is easy to store. It avoids the common issues of softening due to humidity and degradation from environmental exposure.

Professional Resin for LCD Printing

Optimized for low-light LCD printers, this resin delivers higher efficiency than many competing DLP/LCD/SLA-compatible resins. It is specifically designed for use with LCD printers and is not recommended for DLP or SLA machines. It ensures strong prints with minimal shrinkage, while improving print speed, reducing curing time, and maximizing output quality.

Strong Adhesion, Easy Removal

This resin not only offers high print success rates and excellent precision, but also features low release force and minimal platform adhesion. Models are easy to remove from the build plate, and the resin’s low viscosity makes cleaning both the printer and the models easier.

Storage Instructions

Store the resin in a sealed, light-protected container at room temperature. Avoid exposure to sunlight, as it contains high levels of UV light that can prematurely cure the resin. Ideally, store between 15°C and 35°C. Note that lower temperatures increase resin viscosity. Keep the resin sealed and away from dust and moisture, which can negatively affect print quality.

Usage Guidelines

1. Shake the bottle well before use. Do not use in direct sunlight.
2. Wear gloves to avoid direct contact with skin, and ensure proper ventilation.
3. If accidental contact occurs, rinse immediately with plenty of water. Seek medical attention if irritation persists.
4. Clean printed models using high-concentration alcohol (at least 95%) for about 30 seconds.
5. Do not return used resin from the vat to the original bottle. Avoid leaving resin in the vat unused for long periods. For longer storage, transfer to an airtight container or cover with plastic wrap.

Anycubic’s Standard UV Resin is a popular choice among users because it offers strong, durable prints with minimal shrinkage. It also increases print speed, shortens curing time, and maximizes the overall printing efficiency of LCD 3D printers.Features:Main ingredients: Resin monomer & photo-initiatorUV wavelength: 365–410 nmBottom exposure time: 20–60 secondsNormal exposure time: 5–15 seconds- [S]5.11.19077A01- 1280- Hersteller: Raise3D